Wholesale 1300W High Power Full Spectrum LED Grow Light
Ultimate 10-Bar Uniformity for 4x6ft. Commercial Coverage. | Engineered for High-Intensity Yields & Maximum ROI.
1300W Full Spectrum LED Grow Light Design Parameters
Optical and Radiometric Parameters
| Parameter Name(Specification) | Engineering Parameters /Standards | Technical Note |
| Total radiated power(system PPF) | 3640 – 3770 µmol/s | Main output data that replaces multiple traditional HPS or low-wattage LED splicing units |
| System lighting effects(system PPE) | 2.8 – 2.9 µmol/J | True overall lamp energy efficiency including high power drive conversion losses |
| Central peak luminous intensity(max PPFD) | > 1500 µmol/m²/s | Hang at a height of 12 inches (30 cm); suitable for Hang it at a height of 12 inches (30cm), and it is recommended to apply 1000-1200 ppm CO2 as a supplement. |
| Core coverage area(core footprint) | 4 × 10 ft (1.2m × 3.0m) | Rectangular asymmetrical light distribution perfectly matches continuous commercial mobile seedbeds, eliminating blind spots during splicing. |
| LED chip matrix(diode array) | Top-tier high-power white light + 660nm deep red light | Chips from leading global manufacturers ensure spectral consistency in ultra-large arrays. |
| Spectral configuration(spectrum) | Pharmaceutical-grade full-spectrum (Red-Enhanced) | Enhanced 660nm radiation flux, applicable throughout the entire life cycle, with a focus on tackling late-stage flowering and fruit enlargement. |
Electrical Parameters
| Parameter Name(Specification) | Engineering Parameters /Standards | Technical Note |
| Actual system power consumption(AC input power) | 1300W ± 4% | Stable real-world power consumption at 100% full load operation |
| Input voltage | 277-480V AC (or 120-277V) | It is recommended that large CEA plants adopt high-voltage input to significantly reduce the diameter and copper loss of engineering cables. |
| Power factor | > 0.96 | UIndustrial-grade grid connection standards minimize reactive power losses in the power grid. |
| Total Harmonic Distortion (THD) | < 10% | Extremely low harmonic interference, protecting the workshop’s automated environmental control and PLC control bus. |
| Dimming protocol | 0-10V Continuous Dimming / Intelligent Control Bus | Supports external master control units for multi-It can seamlessly interface with mainstream commercial environment control systems to achieve stepped light intensity simulation. |
| Number of cascades(daisy chain) | A single loop can support a maximum of 100 nodes. | Signal impedance isolation technology is used to ensure that the dimming timing of the matrix light group is absolutely consistent. |
Structure and Thermal Management
| Parameter Name(Specification) | Engineering Parameters /Standards | Technical Note |
| Dimensions | 3.0m (length) × 1.2m (width) × 0.1m (height) | SThe 4×10ft extra-long and extra-wide rectangular geometric design eliminates unnecessary light leakage in the corridor. |
| Net weight | Approximately 24-28 kg | For heavy industrial equipment, the installation of suspension trusses must meet commercial safety load standards. |
| Bar count | 10 Bars (Wide-spacing, high-transmittance arrangement) | Increasing the spacing between the light strips significantly reduces the shading rate of top supplemental lighting on natural sunlight in the greenhouse. |
| Thermal design | Heavy-duty 6063 aerospace-grade anodized passive heat dissipation aluminum | Physical passive heat dissipation has a huge surface area, completely eliminating the risk of malfunctions caused by fan lifespan issues. |
| BTU/h | Approximately 4435 BTU/h | Provides HVAC engineers with precise calculations of ventilation and cooling loads for fully enclosed workshops. |
| Ingress protection | IP66 | Features excellent protection against water spray and high-humidity environmeHeavy-duty waterproof and dustproof, capable of withstanding the large-scale spraying operations and high humidity of commercial automated greenhouses. |
Business and Engineering Compliance
| Parameter Name(Specification) | Engineering Parameters /Standards | Technical Note |
| Optical transmission maintenance rate(lifespan L90) | >54,000 hours | After 50,000 hours of continuous operation, the optical decay does not exceed 10%, meeting the depreciation requirements of high-standard projects. |
| Warranty | 5-Year Limited Warranty | Full coverage of driver power supply, LED modules, and core electrical cables. |
| Safety certification(safety standard) | UL8800, cETLus, CE, RoHS | Compliant with electrical regulations for market UL8800 is the highest level of safety and environmental standard specifically for horticultural lighting in North America. |
| Energy efficiency certification(energy rebate) | DLC 5.1 Premium (QPL Qualification) | Helping large, legally licensed farms in North America quickly pass the energy conservation subsidy review by local power companies. |
| Packaging | Heavy-duty modular/folding industrial packaging | Avoiding the transportation challenges of an extra-long 3-meter fuselage, optimizing overseas local delivery and cross-border CBM costs. |
1300W 10-Bar LED Grow Light: The Ultimate Balance of High Intensity and Flawless Uniformity
Engineered for high-yield commercial cultivation, this 1300W powerhouse delivers massive PPFD without sacrificing light distribution. By utilizing a high-density, 10-bar matrix across a 4×6 ft footprint, it eliminates localized hotspots and edge drop-offs. The system ensures every plant receives identical, deep-penetrating photon intensity, driving uniform crop development and maximizing canopy-wide production.
- Monster 1300W output for extreme canopy penetration: Driven by top-tier, high-efficacy LEDs, it delivers deep-penetrating light to lower nodes, significantly boosting overall yield, flower density, and secondary metabolites.
- High-density 10bar matrix eliminates hotspots: Even at a massive 1300W output, the 10-bar architecture evenly diffuses light across the footprint, safeguarding plants from light burn while ensuring consistent growth cycles.
- Optimized 4×6 ft footprint for commercial benches: Specifically tailored for industrial rolling tables and commercial rack systems, maximizing canopy utilization and scaling up your facility’s cultivation efficiency.
A High-power, Foldable Lighting Fixture: Balancing Top-tier Lighting Performance with Logistics Costs
For large-scale cultivation facilities, logistics and labor are critical to profitability. Our 180° foldable structural design slashes packaging volume by nearly 50%, allowing commercial growers to fit double the units per pallet or container. This plug-and-play solution minimizes on-site installation time and drastically reduces freight expenses, making it the premier choice for bulk commercial procurement.
- 180° foldable structure for rapid deployment: Pre-assembled and ready to hang straight out of the box. Single-operator installation drastically reduces labor hours and accelerates large-scale facility setup times.
- 50% volume reduction to squeeze shipping costs: The ultra-compact folded footprint optimizes ocean container and domestic freight space, driving down per-unit transit expenses to the absolute minimum for volume buyers.
- Industrial-grade reliability for mass procurement: Merging elite optical performance with robust, low-maintenance thermal management, this fixture offers commercial operators a high-yield, low-overhead lighting solution built to scale.
Optimized PPFD Distribution and Light Recipe Integration
Precision Spectral Control: The Anti-Stretching Formula for Commercial Consistency
In the critical seedling and cloning stages, excessive red light can lead to weak, elongated stems. Our STG-1300W-F series utilizes a targeted 5000K/6500K spectral solution, rich in blue light (400-500nm). This specialized light recipe effectively triggers cryptochromes to inhibit stem stretching, ensuring your seedlings develop compact, sturdy structures and robust root systems—the essential foundation for maximum commercial yield. Combined with our 10-bar design, this spectrum provides perfectly uniform, high-intensity light distribution across the entire 4x6ft coverage area.
Inspection, Packaging & Transportation
100% Rigorous Quality Inspection
Every LED grow light undergoes 48-hour aging tests and strict optical calibration before packing to ensure zero-defect delivery
Optimized Standardized Packaging
Custom high-density foam and reinforced cartons designed to withstand international transit and reduce shipping volume.
Safe & Efficient Bulk Shipping
Experienced container loading and logistics coordination to maximize space utilization and guarantee on-time global logistics.
Frequently Asked Questions
How does the thermal management of the 1300W LED grow light perform?
The light features a premium aluminum construction designed for superior thermal management. This passive cooling design maximizes surface area to ensure effective heat dissipation without the need for active cooling fans, which helps reduce maintenance costs and operational noise.
What is the advantage of the Nuvotex foldable design for commercial growers?
The Nuvotex foldable design is specifically engineered to slash logistics costs. By allowing the light to be folded, it significantly optimizes packaging and shipping volume, which enhances the overall return on investment (ROI) for commercial operations by reducing transportation expenses and streamlining installation processes.
Can the 1300W LED grow light effectively replace a traditional 1000W HPS?
Yes, this 1300W LED system is designed to provide a balance of high intensity and seamless uniformity that exceeds the performance of traditional 1000W HPS lighting. It offers superior light distribution and efficiency, making it an ideal upgrade for commercial facilities looking to improve crop performance.
How does the 10-bar configuration improve light coverage?
The 10-bar design is engineered to achieve the ultimate balance of high intensity and seamless uniformity. By distributing the LED arrays across 10 bars, the system ensures that the PPFD (Photosynthetic Photon Flux Density) is spread evenly across the 4x6ft coverage area, preventing light hot spots and ensuring consistent growth across the entire canopy.
Planning STG-1300W-F Series 4x6ft Grid Setup?
Let our engineers design a complimentary commercial lighting plan for your facility.
Receive your custom Dialux light simulation & PPE layout report within 24 hours.