Custom 1200W Full Spectrum LED Grow Light for Plants
With a massive 1200W power output and a sleek, linear design built to withstand harsh, high-humidity environments, this is the ultimate industrial-grade solution for replacing traditional high-pressure sodium (HPS) lamps.
1200W Full Spectrum LED Grow Light for Plants Technical Specifications
Optical and Radiometric Parameters
| Parameter Name(Specification) | Engineering Parameters /Standards | Technical Note |
| Total radiated power(system PPF) | 3360 – 3480 µmol/s | Based on measured data from an integrating sphere in the 400-700nm wavelength range |
| System lighting effects(system PPE) | 2.8 – 2.9 µmol/J | The actual overall lighting effect after including power conversion losses. |
| Central peak luminous intensity(max PPFD) | > 2100 µmol/m²/s | Hang at a height of 12 inches (30cm), and use with >1200 ppm CO2. |
| Core coverage area(core footprint) | 4 × 6 ft (1.2m × 1.8m) | Edge PPFD attenuation rate controlled within 15%. |
| LED chip matrix(diode array) | Top-tier white light + 660nm deep red light | For example, configuring Samsung LM301H EVO & Osram photodiodes |
| Spectral configuration(spectrum) | R/B ratio optimization full spectrum | Applicable throughout the entire life cycle, with enhanced red light band specifically for late-blooming plants. |
Electrical Parameters
| Parameter Name(Specification) | Engineering Parameters /Standards | Technical Note |
| Actual system power consumption(AC input power) | 1200W ± 5% | Stable power consumption under 100% full load |
| Input voltage | 100-277V AC or 277-480V AC | High-voltage version (277-480V) specially designed for large CEA plants to reduce line loss. |
| Power factor | > 0.95 | Reduce reactive power to meet industrial power grid connection requirements. |
| Total Harmonic Distortion (THD) | < 10% | Protect the farm’s local power grid from high-frequency harmonic interference. |
| Dimming protocol | 0-10V continuous dimming (10%-100%) | Supports seamless integration with environmental control motherboards such as TrolMaster. |
| Number of cascades(daisy chain) | A single loop can support up to 100+ nodes | Implementing a cascaded network topology using RJ14/RJ45 interfaces |
Structure and Thermal Management
| Parameter Name(Specification) | Engineering Parameters /Standards | Technical Note |
| Dimensions | Length 1.8m × Width 1.2m × Height 0.1m | The 4×6ft rectangular geometric design perfectly matches standard long and narrow seedbeds. |
| Net weight | Approximately 22-25 kg | The total weight, including the drive power supply, tests the load-bearing capacity of the top truss. |
| Bar count | 12 Bars (High-density uniform light distribution) | Reducing the spacing between light strips enables omnidirectional illumination during near-canopy operations. |
| Thermal design | 6063 Aerospace Aluminum Extruded Profile Passive Heat Dissipation | Zero fan, no noise, maximizes surface area for efficient convection heat transfer. |
| BTU/h | Approximately 4094 BTU/h | Enables environmental control engineers to For HVAC engineers to use in calculating cooling load. |
| Ingress protection | IP65 / IP66 | Waterproof and dustproof, able to withstand high humidity environments and spraying operations. |
Business and Engineering Compliance
| Parameter Name(Specification) | Engineering Parameters /Standards | Technical Note |
| Optical transmission maintenance rate(lifespan L90) | >54,000 hours | After 50,000 hours of continuous operation, the luminous flux attenuation does not exceed 10%. |
| Warranty | 5-Year Limited Warranty | Full coverage of driver power supply and LED module |
| Safety Certification(safety standard) | UL8800, cETL, CE, RoHS | UL8800 is the highest safety standard specifically for garden lighting in North America. |
| Energy efficiency certification(energy rebate) | DLC 5.1 Premium (QPL) | Meets the energy subsidy rebate standards of public utility companies in multiple North American states |
| Packaging | Foldable industrial bags | Optimized for palletized shipping to minimize transit. Significantly reduce CBM (cubic meters) and optimize single container loading rate. |
1200W Extreme Output: The Ultimate Industrial HPS Replacement
This customizable 1200W linear grow light is designed for commercial growers seeking maximum yields; it shatters the performance limitations of traditional High-Pressure Sodium (HPS) lighting, delivering higher PPFD density while generating less heat.
- Purpose-built to dominate a 4x6ft core flowering footprint. Ensures perfectly uniform light distribution from edge to center, completely eliminating dark zones in your facility.
- A true 1,200-watt power output drives photons deep into the plant canopy, meeting the plants’ intense light intensity requirements during the flowering and fruiting stages.
- The 1200W LED grow light can increase crop yields and harvest quality while lowering your HVAC cooling costs. Achieve higher production on the same electrical footprint and accelerate your ROI.
LED Grow Lights Custom Designed for Harsh Environments
The sleek, straight-pole design maximizes water resistance and heat dissipation, while engineering customization ensures a perfect fit for your commercial facility.
- Non-standard engineering customization: We offer deep customization—from spectrum fine-tuning and driver configurations to bespoke mounting hardware—tailored specifically to your greenhouse structure, crop type, and electrical layout.
- Zero-hinge rigid design: By eliminating moving parts, we eradicate the mechanical failures and moisture penetration vulnerabilities common in foldable fixtures. Experience faster cleaning and zero maintenance downtime.
- Industrial-grade durability: Featuring superior sealing technology and massive passive heat sinks. Built to run 24/7/365 with uncompromised stability, even in the most demanding, high-humidity, and high-salinity commercial grow environments.
Optimized PPFD Distribution & Light Recipe Integration
Blue Rich Spectrum: Superior Stem Control for Commercial Yields
- In the critical early stages of propagation and seedling development, our precisely engineered spectral output minimizes excessive red light to prevent weak, elongated stems.
- By utilizing a 5000K/6500K spectrum rich in blue light (400–500nm), this 1200W fixture effectively triggers plant cryptochromes to inhibit undesirable stretching.
- This results in compact, sturdy seedlings with robust root systems, ensuring a professional foundation for high-density, large-scale commercial cultivation.
Quality Guaranteed and transportation for LED Grow Light
Integral sphere detection
Our products use integrating sphere testing to measure key parameters: Flux/PPF, Spectrum, CCT/CRI, and Efficacy.
Optimized Standardized Packaging
Custom high-density foam and reinforced cartons designed to withstand international transit and reduce shipping volume.
Safe & Efficient Bulk Shipping
Experienced container loading and logistics coordination to maximize space utilization and guarantee on-time global logistics.
Frequently Asked Questions
Can this 1200W LED grow light effectively replace a 1000W HPS lamp?
Yes, this product is designed as an ultimate industrial HPS replacement, offering superior light output and performance compared to traditional 1000W HPS fixtures.
Is this lighting system suitable for indoor vertical farming environments?
Absolutely. The light features a rigid straight-bar architecture and is specifically engineered to perform reliably in harsh indoor commercial environments, making it ideal for vertical farming.
Are these grow lights eligible for energy efficiency rebates in North America?
Yes, these lights are qualified for energy efficiency rebates in North America, which can help commercial growers offset installation costs.
How does the thermal management design ensure longevity in large-scale commercial facilities?
The unit is built with advanced structural and thermal management features, including efficient heat dissipation technology, ensuring the fixture maintains optimal performance and durability during continuous operation in demanding commercial grow settings.
Planning 4×6ft LED Growth Light Grid Setup?
Let our engineers design a complimentary commercial lighting plan for your facility.
Receive your custom Dialux light simulation & PPE layout report within 24 hours.