Product Categories
Social Media
Home > News > Content
The Value Of Led Street Lighting Energy Saving
- Dec 01, 2018 -

LED street light The basic structure used by its light source is an electroluminescent semiconductor material chip, which is cured with silver or white glue onto the support, then connected to the chip and circuit board with silver wire or gold wire, and then sealed with epoxy resin. It protects the inner core wire and finally installs the outer casing, so the seismic performance of the illuminated LED street light is good.

China's lighting electricity accounts for about 12% of the total electricity consumption of the whole society, and energy waste is serious. Lighting energy conservation is not only an urgent problem to be solved, but also a widespread problem in the whole society. It is understood that the traditional street lamps are basically high-pressure sodium lamps, although they are easy to light, but the energy consumption is large. After being transformed into energy-saving LED street lamps, LED street lamps not only have higher luminous efficiency, longer service life, but also energy saving and environmental protection.

According to estimates, a street lamp or high bay lamp with 100 watts of high-pressure sodium lamp is used continuously for 10 hours and consumes 1 kWh of electricity. The ED street lamp that produces the same illuminance is used continuously for 10 hours, consumes only 0.32 kWh, and the energy saving rate reaches 68. %.